Irving, Texas · Kitchen remodeling
Kitchen Countertop Installation in Irving
Kitchen Countertop Installation in Irving, Explained
Countertop installation means measuring your kitchen, removing the old tops, setting new ones level on your cabinets and sealing the edges and sink cutout. It is one part of a kitchen remodel with Irving Kitchen Remodel Elite, and it can also be a project on its own.
Most homeowners here ask about timing and price first. Call us and we set up your estimate with that one call. We serve Irving and nearby towns.
Irving Home and Code Facts That Matter
About 36% of Irving's 102,512 homes were built before 1980.1 That means many kitchens have older cabinets, walls and plumbing that need a close look before new tops go on.
The International Residential Code, adopted by Texas under Local Government Code §214.212, applies to all construction, alteration, remodeling, enlargement, and repair of residential structures in a municipality.2
Swapping tops often needs no big permit. Moving plumbing or electrical can change that, so ask us, and check with Irving's building department for the final word.
How Kitchen Countertop Installation Works
A good install follows the same order every time. Each step matters.
Measuring and templating come first. The installer measures the cabinet run, the sink and the cooktop. Accurate numbers here keep every later step clean.
Removal comes next. The old tops are loosened and lifted off, and the plumbing is disconnected. Ask us how that will be handled before the day arrives.
Then the cabinets get checked. In older Irving homes, cabinets often have settled and need shimming before any top is set. A top set on uneven cabinets will rock, crack or leave gaps. If the boxes or doors are the bigger problem, see kitchen cabinet door replacement.
Seams and cutouts are the careful part. Slab-foundation homes and shifting clay soil can crack seams over time, so where a seam lands matters. The sink cutout has to match the sink you chose.
Last, the top is set, edges are finished and joints are sealed. Plan for a few days without a working sink and cooktop.
If you are replacing floors too, schedule that with care. See kitchen flooring installation for how that work fits in.
Countertop Installation Cost in Irving
Countertop installation cost depends on the material, the square footage, the edge you choose and whether old tops need removal. Many Irving homeowners ask for a price per linear foot or per square foot. We will tell you which one applies to your material when we set up your estimate.
For context, typical national prices for a full kitchen remodel run $15,000 to $50,000, and that covers far more than tops.3 For the whole budget, see kitchen remodel cost.
Typical prices
| Area | From | To |
|---|---|---|
| Full kitchen remodel (national range) | $15,000 | $50,000 |
| Per sq ft (national range) | $150 | $250 |
Typical national range for full kitchen remodel from homeguide.com. Prices in Irving can differ; your estimate sets the real price.
Countertop Materials Compared: Cost and Care
Each material trades price, durability and upkeep differently. The right pick depends on how you cook and clean. We leave the dollar cells open because we give figures only in your estimate.
| Material | Cost level | Upkeep | Watch for |
|---|---|---|---|
| Laminate | Lowest | Wipe clean | Edges and seams can swell with moisture |
| Quartz | Mid to high | Very little | Heat from hot pans |
| Granite | Mid to high | Seal regularly | Unsealed stone can stain |
| Butcher block | Mid | Oil and re-sand | Humidity and water near the sink |
Hard North Texas water leaves spots on dark surfaces, and heavy summer humidity is rough on unsealed stone and wood.
Countertop Mistakes Irving Homeowners Often Miss
Most countertop problems come from decisions made before install day. Order tops only after your cabinets are final. Templating on cabinets that later move means costly redo work. Also check that your sink and faucet fit before anything is cut, since undermount sinks need solid support on older cabinets.
Permits and inspections. The International Residential Code applies to remodeling and repair of residential structures in Texas cities.2 A top swap alone often needs no big permit, but plumbing or electrical changes can. Ask Irving's building department, or ask us, before work starts.
Hidden cabinet and wall trouble. Old tops can hide damaged or uneven cabinets and bad drywall behind them. Ask what happens to the old top and whether removal damages the wall, which is common in older homes. Dallas-area homes often have tile or laminate with backer that comes up messy, so allow for wall repair. Tell us about any soft spots or sagging and we will work that into your estimate.
Heat and humidity. Texas heat and humidity affect adhesive curing and seam fit. Ask us how the install will be scheduled, and give yourself room in the calendar for summer delays.
Countertop Installation Questions Answered
How much does it usually cost to install countertops?
It depends on the material, the size, the edges and old-top removal. Call us and we set up your estimate with straight ranges. For the bigger budget, see kitchen remodel cost.
Can I install kitchen countertops myself?
Laminate is the most forgiving for a handy homeowner. Stone and quartz are heavy, and seams and sink cutouts are easy to get wrong. Ask us before you buy slabs.
What is the average cost of laminate countertops per square foot?
Laminate is the lowest-cost option, but we do not quote a figure here. We give a real number when we set up your estimate.
How much does 7 feet of quartz countertop cost?
It depends on depth, edge, seams and cutouts. Send us the layout and we will give you a range.
Should countertops be glued down?
Yes, tops are usually fastened to the cabinets with adhesive and set level. Your installer will tell you what suits your material.
Talk to Us About Your Project
Ready to plan your countertops? Call us, or send the form, and tell us what you want changed.
Get in touch
Service area
Irving, TX 75038